Centrifugal type Concrete Pipe Machine

1. Product Introduction of Centrifugal type Concrete Pipe Machine

The machine takes sands, stones and cement as raw materials to produce many kinds of reinforced concrete drainage pipe with the length of 1000-4000mm, internal diameter of 200-4000mm with the mouth shapes of flat, tongue and groove and socket and spigot. All mechanical indexes have meet the national standards. They have been used widely in deep well, municipal drainage, expressway and other water supply and sewerage works with higher level required. The production efficiency can reach 4-5 piece/hour.

2. Features of Centrifugal type Concrete Pipe Machine

The centrifugal machine is mainly used to manufacture the centrifugal equipments manufacturing the reinforced concrete drainpipes, driving the spinning of the drainpipe concrete pipe mold loaded with some concrete and reinforcing steel with a certain mixing ratio at different speeds, and  the solid phase particles of concrete in steel mould will be centrifugal settling in the steel mould inner surface under centrifuge, meanwhile draining the excessive water, thus forming compacting concrete structure namely reinforcing concrete drainpipe. The machine mainly consists of riding wheels, shafts, bearing block, bearing, V-blet pulley, base and electromagnetic speed-controlling motor.

3. Technical Index of Centrifugal type Concrete Pipe Machine

No.	Item		Unit	Model
				Double-wheel	Three-wheel
1	Riding wheel thread		MM	1870
2	Riding wheel wheelbase		MM	1500-2800
3	Riding wheel external diameter		MM	800-920
4	Riding wheel width		MM	100
5	Angle between wheel center and the center of steel mould		(°)	75°-110
6	The Max. length of molding drainage pipe		M	2-4
7	The Max. diameter of molding drainage pipe	Plain top/tongue and groove/pipe-jacking	MM	Φ2600	Φ1800
		Bell and spigot		Φ1800	Φ1800
8	The motor power		KM	37-90	55-132
9	The range of speed of main drive axle		r/min	100-500(continuous)	100-500(continuous)

Two Molds Placed concrete electric spun pole machine

Easy Operation and Most Complete Pre-stressed concrete electric spun pole machine

Pole Mold Diameter (mm)	Spinning wheel pitch(mm)	Running wheel diameter (mm)	Mold Length (m)
150	2000 , 3000	600	7-12
170	2000,3000	600	7-12
190	2000,3000	650	7-15
230	2000,3000	650	6-9
300 equal diameter	2000,3000	600	6-9
350 equal diameter	2000,3000	650	6-12
30	2000,3000	650-780	6-15

Concrete Pole making Machine
Inner diameter of top end (mm)	Length (m)	Tread (m)	Running Wheel Diameter (mm)	Length (m)	Tread (m)	Running wheel diameter (mm)
100	6~7	2	600	/	/	/
130	6~8
150	6~11
170	7~12
190	7~15			15	2	650
230	6~10			12
270	6			9
270	6			9
283	6			/		/
310	6~10		650	/		/
350	6			9		700
390	6		700	9		750
430	6		750	/		/
470	6		780	/		/
510	6		800	9		850
550	6		850	/		/

Algeria Standard concrete rectangle/square electric pole machine

Concrete Rectangle Pole Machine

Shandong CICQ heavy Industry Co., Ltd.  was founded in 1990, located in famous historical and cultural city ,Qingzhoucity of Shandong Province. The leading products of our company are: all kinds of concrete pipe/pole machines, concrete round or square pile mold used for building foundation, concrete batching plant, gantry crane/bridge crane and other support equipment. Our products have been exported to Kenya, Nigeria,Sudan, Afghanistan, Papua, Cambodia, Indonesia, Ethiopia. Our products have been making a great economic benefits for customers and have been widely praised for our excellent turnkey project. 

1. Introduction of Concrete Square Pole Steel Mould

The mold is made of pressed sheet of steel plate and there are also longitudinal and circular steel plate on the cylinder body. So it is very strong, rigid, durable and so on. The steel mould is processed in segments and overall assembled in order to facilitate transport, assemble rapidly, and maintain conveniently. It's essential in manufacturing the square prestressed concrete pole as well as the non-prestressed ones.

concrete square spun pole mould

concrete square spun pole steel mould

2. Features of Concrete Square Pole Steel Mould

2.1 New designs with traditional groove steel and new-style square steel;

2.2 Exquisite manufacturing. The four fillet curves of the mould is controlled strictly within 20 degrees not the usual 26-30 degree of the general factories. ( the smaller radian has a higher demand for the factory equipments and workers' technology );

machined until flange connection is polished and so that the connection will be smooth. However, other factories usually machine the mold in segments and then connect together, then, height mismatch will arise in the connection), improve the concentricity of the running wheel and flange;

2.4 The exterior is concise, the welding trim, tongue and groove well sealed;

 

3. Regular Size of Concrete Rectangle Pole Steel Mould in Algeria